CTC Union IPCAM-8309FW Manuel d'utilisateur télécharger pdf (Page 23)

4.3.3 Network

4.3.3.1 Information

MAC address：Displays the MAC address of the device.

Obtain an IP address automatically (DHCP)：If a DHCP server is installed on the network, to

select this so the IP address is assigned by the DHCP server.

Note：When you set Obtain an IP address automatically (DHCP), make sure that the DHCP

server is working on the network.

Use the following IP address：Select this when a fixed IP address is set.

IP address：Enter the IP address of the device.

Subnet mask：Enter the subnet mask.

Default gateway：Enter the default gateway.

Use the following DNS server address：Select this when you set the fixed address as the IP

address of DNS server.

Primary DNS server：Enter the IP address of the primary DNS server.

Secondary DNS server：Enter the IP address of the secondary DNS server, if necessary.

HTTP port number：Select 80 in general situations. If you want to use a port number other

than 80, select the text box and enter a port number between 1024 and 65535.

Note：When you have set the HTTP port number to a number other than 80 on the Network

setting page or in the Setup Program, access the device by typing the IP address of the device

on the web browser as follows:

Example: when HTTP port number is set to 2000 Æ http://192.168.0.100:2000/

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 52 53

Pas de commentaire

CTC Union IPCAM-8309FW Manuel d'utilisateur Page 23